1. Heim
  3. SUNLU FilaDryer S1:3D-Filamenttrocknerbox

SUNLU FilaDryer S1:3D-Filamenttrocknerbox

$39.99 USD
$59.99 USD $39.99 USD
Spare 33%
4.68 ( 21  Reviews )
4 interest-free payments of ... with
Klarna
  • Free shipping to most of USA, EU, UK, CA and AU regions
  • Guaranteed Secure Checkout
  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
Get PLA at $6.6/KG | SUNLU S1 Plus Filament Dryer and PLA Filament Bundle
$39.99 USD
$59.99 USD $39.99 USD

  • 【Verabschieden Sie sich von schlechtem 3D-Druck durch Wet FilamentWet Filament für den 3D-Druck wird zu Fadenbildung, Verstopfung, schlechter Haftung und Schichtverschiebung führen. Das SUNLU FDM 3D Filament Dryer Enclosure kann während des Druckens trocknen, um Ihr 3D-Modell zu verbessern und die Auswirkungen der objektiven Umgebung auf den Druck von 3D-Filamenten zu reduzieren..
  • 【Personalisierte Temperatureinstellung Der Benutzer kann die Temperatur der Trocknungsbox je nach 3D-Filamenttyp, Umgebungstemperatur, Luftfeuchtigkeit und anderen Faktoren einstellen. Einstellbarer Temperaturbereich 35~55. Geeignet für mehr als 20 Arten von 3D-Druckfilamenten, die üblicherweise auf dem Markt verwendet werdenket
  • 【Personalisierte Trocknungszeiteinstellung Die standardmäßige kontinuierliche Trocknungszeit der Trocknungsbox beträgt 6 Stunden, und Sie können die Trocknungszeit auch manuell einstellen. Der Zeiteinstellungsbereich beträgt 0~24 Stunden. Gängige 3D-Filamente auf dem Markt benötigen unter normalen Umständen nur 3-6 Stunden Trocknung, um ein gutes Druckerlebnis und einen guten Druckeffekt zu erzielen..
  • 【Kompatibel mit 99 % der 3D-FilamentspulenA: Die maximale Kapazität der SUNLU-Trockenbox beträgt Φ210*85(H)mm. B: Kompatibel mit allen gängigen 3D-Filamentmarken SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC usw.; C: Funktioniert perfekt mit allen Standardfilamentdurchmessern von 1,75 mm/2,85 mm/3,00 mm..
  • 【Benutzerfreundliches Design & 1 Jahr garantierter Kundendienst A: Das Design mit zwei Rollen in der Box ermöglicht das Drucken während des Trocknens; B: 2-Zoll-LCD-Monitor mit großem Bildschirm, kann Temperatur und Zeit klar und hell anzeigen; C: Ultra leises Design, weniger als 10 dB während des Betriebs, keine Beeinträchtigung Ihres Lebens und Ihrer Arbeit; D: Exquisites Verpackungsdesign – bestes Geschenk: Kommen Sie und kaufen Sie eines, um es Ihren Freunden zu schenken, die 3D-Druck liebeng

360° Enclosed Heating Design

Wrapped heating ensures even temperature distribution

Adjustable Temperature

35–55°C range supports multiple filament types

Adjustable Time

Set drying time from 0–24 hours

Built-in Fan Upgrade

Improved airflow for faster drying

Print While Drying

Supports continuous printing during drying

Load Filament
Power On
Set Temperature
Check Humidity
Set Drying Time
Drying Complete

Downloads

User Manual
Looking for more infomations

FAQs

Regarding the compatibility of this AMS heater, which AMS models is it compatible with? And how visible is it?

This SUNLU AMS Heater is compatible with the Bambu Lab AMS - Automatic Material System.

  • Please note that this product is optimized and upgraded exclusively for Bambu Lab's AMS (1st gen), and is not compatible with Automatic Material Systems from other brands.
  • Regarding the visibility of the lid, the entire lid is not fully transparent. There is a transparent area on the front of the lid that allows you to see the internal operation.

What other precautions should be taken when using AMS heaters?

  • When opening this product, lift it only to the designated stop position. Pay attention to the opening angle and force to avoid damage from excessive movement.
  • To ensure optimal drying results, do not open the AMS Heater during the drying process.
  • When the ambient temperature is below 10℃, slow heating or the actual temperature inside the chamber being slightly lower than the displayed temperature is normal.
  • When setting the working temperature to 70℃, please ensure the filament spool has a temperature tolerance greater than 70℃ to avoid deformation.

SAFETY PRECAUTIONS YOU NEED TO FOLLOW

  1. Do not place the SUNLU AMS Heater within the reach of children. Electrical safety should be observed during operation. Do not use this product near water, such as bathrooms, bathtubs washbasins and other places where water is easily accessible.
  2. Please use the original power cord or a power cord that meets the safety certification requirements.
  3. When not using this product, please turn off the power to avoid sudden fire.
  4. During the working process of this product, please do not put the product on the objects which are sensitive to temperature.
  5. Do not touch the heater or fan inside the box during the working process of this product to avoid burns. When drying filaments, the top cover of the drying box should be covered to avoid heat dissipation. Avoid moving this product during normal operation to prevent burns caused by the high temperature of the outer surface.
  6. Please do not block the internal air inlet and outlet to avoid abnormal heat accumulation.
  7. If the product malfunctions, please turn off the power and disconnect the power cord from the power outlet, then contact the after-sales support team (support@sunlu.com).

Common Troubleshooting

  • Issue: Failure to Power On
    Possible Causes: Abnormal Power Connection
    Troubleshooting Methods: Check whether the power cord is properly connected to the socket ,and verifyif the fuse is blown.
  • Issue: Screen Garbling/Incomplete Display
    Possible Causes: Poor contact or a damaged display screen.
    Troubleshooting Methods: Power off and restart. If the issue persists, the display screen may need to be replaced. Please contact us via support@sunlu.com.
  • Issue: ER1
    Possible Causes: Abnormal Temperature Detection
    Troubleshooting Methods: Check whether the temperature sensor connection is secure.
  • Issue: ER2
    Possible Causes: Left PTC Heating Fan Malfunction
    Troubleshooting Methods: Check whether the fan is not rotating or is obstructed by foreign objects.
  • Issue: ER3
    Possible Causes: Right PTC Heating Fan Malfunction
    Troubleshooting Methods: Check whether the fan is not rotating or is obstructed by foreign objects.

Order Tracking

For non-pre-sale orders, the delivery time is generally 1-7 working days, and you can track your order on the website.
Click here for more information(Shipping Policy).

What is the Refund & Return policy?

Our goal is for every customer to be totally satisfied with their purchase. If this isn’t the case, let us know and we’ll do our best to work with you to make it right.

Store email: sales02@sunlu.com
After-sales email: support@sunlu.com

Why does it show a shipping charge of several hundred dollars at checkout?

You selected the wrong country/region, please go back to the product page, click the correct country or region where you are, and then select the product to checkout.
We can only ship from the warehouse in the corresponding country/region and cannot ship across country or regions.

Is our filaments(like PLA, PLA+, etc.) a food safe material?

PLA is a food-safe material, but the filament will be added with toner during the production process, and it may also be contaminated by the printing nozzle during the printing process, so we do not recommend you to use PLA to print tableware